The Bennche Bighorn 700 is a popular UTV that is widely used for work and recreation. According to recent statistics, the sales of UTVs have been on the rise with a projected growth of 6.2% by 2027.
While the Bennche Bighorn 700 is known for its ruggedness and durability, it is not immune to problems that can be frustrating for its owners.
In this article, we will discuss common issues and maintenance tips for the Bennche Bighorn 700. From overheating to transmission problems, we will explore some of the most common issues that owners face and provide tips on how to fix and prevent them.
By following these maintenance tips, owners can keep their vehicles running smoothly and avoid costly repairs down the road. Whether you use your Bennche Bighorn 700 for work or play, this article will serve as a guide to help you keep your vehicle in top shape.
Table of Contents
Key Takeaways
- Overheating, engine start issues, transmission problems, loss of speed/acceleration, and rough idling/stalling in idle are common issues with the Bennche Bighorn 700.
- Proper maintenance and care, such as bleeding air from the coolant system, adjusting valve clearances, and cleaning the throttle body, can help prevent and address many of these issues.
- Bad fuel injectors can cause problems, such as spraying two streams of fuel instead of a fine mist.
- Some problems may be out of the owner’s control, but regular maintenance and preventative care can go a long way in keeping the Bennche Bighorn 700 running smoothly.
Fixing Bennche Bighorn 700 Common Issues
Overheating and Starting Issues
The Bennche Bighorn 700 is a UTV that has been known to experience overheating and starting issues, which can be frustrating for owners. These issues can be caused by several factors, including a flawed temperature sensor, air blockage in the coolant system, a blown head gasket, faulty valves, dead/loose battery cables, or degraded fuel.
Troubleshooting techniques can help owners diagnose the root cause of these issues and take appropriate action to fix them. Causes of overheating in the Bennche Bighorn 700 can be due to a variety of factors. A flawed temperature sensor may not accurately report the temperature of the engine, leading to overheating. Air blockage in the coolant system can also cause overheating, as coolant is not able to circulate properly. Additionally, a blown head gasket can allow coolant to enter the engine, leading to overheating.
Troubleshooting techniques such as checking the temperature sensor, inspecting the coolant system for blockages, and performing a compression test can help owners identify the cause of overheating and take appropriate action to fix it.
Also Read:
- Fix Your Wildcat Woes: Arctic Cat 1000 Solutions
- Fix Your Mahindra UTV Problems Today!
- Fix Your Polaris Ranger XP 900 Problems Today!
Transmission and Acceleration Problems
One potential cause of transmission and acceleration problems in the Bennche Bighorn 700 could be a failing fuel pump or a clogged fuel filter/screen. The fuel pump is responsible for delivering fuel to the engine, and if it is not functioning properly, it can lead to a lack of power and acceleration. Similarly, a clogged fuel filter or screen can restrict the flow of fuel to the engine, resulting in poor performance.
To address these issues, it is important to inspect the fuel pump and filter/screen regularly and replace them if necessary. Additionally, adjusting the shift linkage can also improve acceleration and transmission performance. This involves removing the seats and center console, holding the turnbuckle in place with an 8mm wrench, loosening the locking nuts with a 14mm wrench, turning the turnbuckle until it kicks into low gear, testing, and then tightening the locking nuts.
By addressing these potential causes of transmission and acceleration problems, owners can ensure that their Bennche Bighorn 700 is running smoothly and efficiently.
Maintenance and Care Tips
Regular attention given to the care of the Bennche Bighorn 700 can help prevent potential complications from arising. One of the most important aspects of maintenance is ensuring the proper functioning of the fuel injectors. These components are responsible for delivering fuel to the engine, and if they become clogged or damaged, they can cause a range of problems, including loss of power, rough idling, and poor fuel efficiency. To prevent these issues, it is important to inspect the fuel injectors regularly and replace them if necessary. Additionally, it is important to use high-quality fuel and to keep the fuel tank clean to prevent debris from entering the injectors.
Another critical aspect of maintenance for the Bennche Bighorn 700 is the coolant system. This system is responsible for regulating the temperature of the engine, and if it fails, the engine can overheat, causing serious damage. To prevent this, it is important to regularly inspect the coolant system and perform any necessary maintenance, such as flushing the system and replacing the coolant. Additionally, it is important to bleed any air from the system to ensure proper circulation.
By taking these steps, owners can help ensure the longevity and reliability of their Bennche Bighorn 700.
Frequently Asked Questions
What is the average lifespan of a Bennche Bighorn 700?
The average lifespan of a Bennche Bighorn 700 is difficult to determine as it depends on various factors such as usage, maintenance requirements, and environmental conditions. With regular maintenance and care, the UTV can last for several years.
Can the Bennche Bighorn 700 be used for heavy-duty work?
The Bennche Bighorn 700 is a versatile and high-performance UTV that can be used for heavy-duty work. Its robust design and powerful engine make it suitable for various tasks. However, regular maintenance is crucial for optimal performance.
What is the fuel efficiency of the Bennche Bighorn 700?
The fuel efficiency of the Bennche Bighorn 700 varies depending on factors such as the terrain and load. Regular maintenance, such as replacing a clogged fuel filter and ensuring proper valve clearances, can improve fuel efficiency.
Are there any safety concerns with the Bennche Bighorn 700?
Safety measures for the Bennche Bighorn 700 include wearing appropriate protective gear and following all manufacturer guidelines. A maintenance checklist should be regularly followed to ensure the UTV is in good condition for safe operation.
How does the Bennche Bighorn 700 compare to other UTVs in its class?
A comparison analysis of the Bennche Bighorn 700’s performance evaluation against other UTVs in its class shows mixed reviews. Some owners report positive experiences, while others note issues with overheating, engine starting, and transmission problems. A thorough assessment of maintenance and preventative care is necessary to ensure optimal performance.