Axis 700 UTV Problems: Fixes & Prevention Tips

If you’re the proud owner of an Axis 700 UTV, you know that it can be a valuable asset for work and play. However, like any vehicle, it’s not immune to problems. From electrical issues to engine troubles, there are several common Axis 700 UTV problems that owners should be aware of.

One of the most frustrating things about owning a vehicle is dealing with unexpected breakdowns and malfunctions. When it comes to your Axis 700 UTV, it’s important to be familiar with its common issues so that you can identify and address them quickly.

By doing so, you’ll not only avoid costly repairs down the line but also ensure that your vehicle stays in top condition for all your adventures on and off the road. In this article, we’ll take a detailed look at some of the most prevalent Axis 700 UTV problems and provide tips to help you tackle them effectively.

Axis 700 UTV Overview

You’re probably picturing yourself cruising through rough terrain on the Axis 700 UTV, but before we dive into its problems, let’s get an overview of this powerful machine. The Axis 700 UTV is a side-by-side vehicle designed for off-road adventures. It boasts a powerful 686cc liquid-cooled engine and can reach top speed of up to 45 miles per hour. The UTV has a towing capacity of up to 1,200 pounds and can carry up to four passengers.

When compared to other UTVs in its class, the Axis 700 stands out with its impressive specifications. Its independent suspension system allows for a smooth ride even on bumpy terrains, while its hydraulic disc brakes provide excellent stopping power when needed. The UTV also features electronic fuel injection and selectable two or four-wheel drive options, making it versatile enough for any adventure you have planned. With all these features combined, it’s no wonder why the Axis 700 is a popular choice among off-roading enthusiasts.

Most Common Axis 700 UTV Problems

Electrical System Issues

If you’re experiencing issues with your Axis 700 UTV’s electrical system, there are a few common culprits to consider. One potential issue is a battery that isn’t holding its charge, which can be caused by a variety of factors such as old age or a faulty charging system. Another possible problem is starter failure, which can result in the engine not turning over or starting at all. Finally, wiring harness problems can cause a range of electrical malfunctions and are often difficult to diagnose without professional assistance.

Battery Not Holding a Charge

Unfortunately, it seems like your battery just isn’t cutting it anymore and needs to be replaced if you want to avoid any further issues with your Axis 700 UTV. Replacing the battery is the most straightforward solution to this problem, but before doing so, it’s important to troubleshoot the charging system. Here are some things to consider:

  • Check the battery connections for corrosion or loose connections.
  • Test the voltage of the battery while running and see if it matches what’s recommended in your owner’s manual.
  • Inspect the alternator and regulator for damage or malfunction.
  • Consider upgrading to a higher quality battery that can handle more strain.
  • Make sure all electrical components are working properly and not draining power unnecessarily.

By addressing these potential issues, you may be able to prolong the life of your new battery and prevent future problems with your Axis 700 UTV. Remember, taking care of routine maintenance will save you time and money in the long run.

Starter Problems

One potential issue that can arise with the Axis 700 is trouble starting the engine. If you find yourself in this situation, there are several troubleshooting steps you can take to diagnose and solve the problem. First, check the battery to make sure it has enough charge to start the engine. If it doesn’t, recharge or replace it as necessary.

If the battery is not the issue, then check the starter motor and solenoid for common causes of failure such as loose connections or damaged wiring. Additionally, ensure that all other electrical components are functioning properly and no fuses have blown. If none of these solutions work, consult with a professional technician for further assistance in diagnosing and repairing any more complex issues with your Axis 700’s starter system.

Common CausesTroubleshooting Steps
Dead BatteryCheck Battery Charge
Loose ConnectionsInspect Starter Motor and Solenoid
Damaged WiringCheck Electrical Components
Blown FusesConsult Professional Technician

Remember that maintaining proper care of your UTV’s electrical system will help prevent future starter problems from occurring. Follow recommended maintenance schedules and keep all components clean and free from debris or corrosion buildup. By taking these steps, you can ensure that your Axis 700 starts smoothly every time without any problems.

Wiring Harness Issues

To tackle the wiring harness issues on your Axis 700 UTV, you must be vigilant in maintaining and monitoring your machine’s electrical system. Wiring harness issues can cause a range of problems such as blown fuses, malfunctioning lights or electronics, and even complete engine failure. To avoid any unwanted hiccups, regularly inspect all wires and connections for signs of damage or wear.

If you do encounter a wiring issue, there are repair options available. You can replace the entire wiring harness or try to identify and fix the specific problem area. Troubleshooting tips include using a multimeter to test for continuity and checking for loose connections.

It is also important to use proper tools when working with electrical systems to prevent further damage or injury. By taking these precautions and addressing any issues promptly, you can ensure your Axis 700 UTV remains reliable and safe for all your off-road adventures.

Suspension Problems

The suspension on the Axis 700 UTV could use some improvements, but with a few tweaks, it can provide a smoother ride. One way to address this issue is by adjusting the suspension settings according to your needs. You can start by checking the manufacturer’s recommended settings and adjust them based on your riding style and terrain.

Another option is upgrading the shocks. There are various aftermarket shocks available that offer better damping and improved performance over the stock shocks. However, before purchasing new shocks, make sure they are compatible with your UTV’s specifications. With these simple adjustments or upgrades, you can significantly improve the Axis 700 UTV’s suspension system and enjoy a smoother ride on any terrain.

Transmission and Gearbox Issues

If you’ve been experiencing suspension problems with your Axis 700 UTV, it’s possible that other issues may arise as well. One area to keep an eye on is the transmission and gearbox. These components are crucial to the smooth operation of your vehicle and any issues with them can quickly become a major headache.

One common problem is clutch slipping, which can make it difficult to shift gears smoothly or cause the engine to rev higher than normal without providing much power. Gear shifting difficulties can also occur, making it hard to get into or out of certain gears. If you notice these symptoms, it’s important to have your UTV inspected by a professional mechanic who can diagnose and repair the issue before it gets worse. Here are some potential causes for these problems:

  • Low or contaminated transmission fluid
  • Worn clutch plates
  • Damaged gear synchronizers
  • Faulty shifter linkage

Steering Problems

Steering problems in your Axis 700 can quickly become a safety hazard, so it’s crucial to keep an eye out for any warning signs. One of the most common issues with the steering system is alignment concerns. If you notice that your vehicle is pulling to one side while driving or if you feel like you’re constantly correcting your steering wheel, then it’s time to have your wheels aligned. Misaligned wheels can cause uneven tire wear, reduce fuel efficiency, and make it harder to control your vehicle.

Another potential issue with the steering system is power steering malfunction. This problem can occur due to a variety of reasons such as low power steering fluid levels, faulty pump or hoses, or a malfunctioning power steering rack.

When the power steering stops functioning correctly, you’ll experience difficulty in turning the wheel and may even hear strange noises coming from under the hood. It’s essential to address any power steering issues immediately as driving without proper assistance can be dangerous and lead to accidents on rough terrain.

Brake Issues

You may have noticed a slight decrease in braking performance, but don’t worry – it’s not necessarily a sign of brake issues. Before jumping to conclusions, there are several factors that can cause this problem. Here are some troubleshooting techniques that you can use before considering brake maintenance:

  • Check the brake pads: Worn-out or damaged brake pads can significantly affect your UTV’s braking ability. Inspect them regularly and replace them if necessary.
  • Adjust the brake cable tension: A loose or tight brake cable can lead to poor braking performance. Make sure that the cable is properly adjusted according to the manufacturer’s specifications.
  • Clean the brakes: Dirt, mud, and debris on your brakes can reduce their effectiveness. Clean them with water and soap after every ride.
  • Inspect the brake system: If none of these techniques improves your UTV’s braking performance, then it may be time to inspect the entire brake system for damage or malfunction.

Remember that proper maintenance is key to keeping your UTV safe and efficient. By using these troubleshooting techniques, you can identify and resolve any issues with your brakes before they become more serious problems.

Engine Problems

When it comes to maintaining your Axis 700 UTV, one issue that you may encounter is engine problems. These can range from minor issues like strange noises to major ones like complete engine failure. However, with proper troubleshooting tips, you can identify and fix most common engine problems.

One of the most common causes of engine problems in UTVs is improper maintenance or lack thereof. Neglecting oil changes, air filter replacements, and spark plug replacements can cause wear and tear on the engine components leading to reduced performance or even engine damage.

Other common causes include fuel system issues such as clogged fuel injectors or dirty filters, electrical issues such as faulty sensors or wiring issues, and cooling system problems like leaks or blockages. By regularly inspecting your UTV’s engine and addressing any potential issues right away, you can prevent costly repairs down the road.

Solutions and Tips for Addressing Axis 700 UTV Problems

Now that we have discussed the common engine problems of the Axis 700 UTV, it’s time to focus on preventive maintenance and troubleshooting techniques. By doing so, you can prolong the lifespan of your vehicle and avoid costly repairs in the future.

Here are some tips to help you address Axis 700 UTV problems:

  • Conduct regular inspections: Check your UTV for any signs of wear and tear or loose parts. This will allow you to catch potential issues early before they become bigger problems.
  • Keep track of maintenance schedules: Follow the manufacturer’s recommended maintenance schedule and keep a record of when each service was performed. This will help you identify patterns or recurring issues that need attention.
  • Learn basic troubleshooting techniques: Familiarize yourself with simple repairs such as changing spark plugs or replacing air filters. This will save you money by avoiding trips to a mechanic for minor issues.
  • Use high-quality parts: Always use genuine replacement parts when repairing your UTV. Cheap knockoff parts may save you money initially but could cause more significant problems down the road.

By following these preventive maintenance and troubleshooting tips, you’ll be able to keep your Axis 700 UTV running smoothly with fewer unexpected breakdowns or repairs needed.

Read About:

Frequently Asked Questions

Is the Axis 700 UTV suitable for off-road use?

Looking for a reliable off-road UTV with impressive capabilities and durable construction? The Axis 700 UTV may be just what you need. Its tough build and exceptional features make it ideal for adventurous journeys off the beaten path.

Can the electrical system issues be resolved with a simple DIY fix?

If you’re experiencing electrical issues with your UTV, there are DIY fixes and troubleshooting tips that can help. It’s important to have a basic understanding of electrical systems and follow safety precautions when attempting any repairs.

What is the average lifespan of the transmission and gearbox in the Axis 700 UTV?

The average lifespan of a transmission and gearbox can vary depending on usage, maintenance, and environmental factors. However, with proper care and regular maintenance, they can last for years before needing to be replaced or repaired.

Are there any common issues with the brakes that could be dangerous while driving?

Brake safety is crucial for any vehicle. Regular maintenance of brakes can prevent dangerous situations while driving. Here are some tips: check brake pads and rotors for wear, inspect hydraulic lines for leaks, and ensure proper adjustment of the parking brake.

What is the recommended maintenance schedule for the engine of the Axis 700 UTV?

To keep your Axis 700 UTV running smoothly, it’s important to follow the recommended engine maintenance schedule. This includes regular oil changes, air filter replacements, and spark plug inspections. By taking care of your engine, you’ll ensure that your UTV is always ready for whatever adventure comes your way.

5 thoughts on “Axis 700 UTV Problems: Fixes & Prevention Tips”

Leave a Comment